Common Commands
This chapter describes the CLI commands used in the USER EXEC, PRIV EXEC, and GLOBAL
CONFIG modes.
The PRIV EXEC command set contains those commands available within the USER EXEC
mode. Some commands can be entered in either mode. Commands entered in either USER
EXEC mode or PRIV EXEC mode are referred to as EXEC mode commands. If a user or
privilege is not specified, the referenced command can be entered in either mode.
2.1 Common Commands
Table 2.1 summarizes available common commands:
Table 2.1 Common Commands in RFSwitch
Command Description Ref.
clrscr Clears the display screen page 2-2
exit Ends the current mode and moves to the previous mode page 2-3
help Displays the interactive help system page 2-4
no Negates a command or sets its defaults page 2-5
service Services or debugs the switch page 2-7
show Shows running system information page 2-38
To Next Page
Loading...
