Motorola RFS Series User Manual

Motorola RF Switch CLI Reference Guide
4-8
4.1.4 change-passwd
 Priv Exec Command
Changes the password of a logged user
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
change-passwd
Parameters
None
Usage Guidelines
A password must be between 8 to 32 characters in length. For security, the console does
not display user entered key words or the old password and new password fields.
Verify the console displays a “password successfully changed” message.
Example
RFSwitch#change-passwd
Enter old password:
Enter new password:
Password for user 'admin' changed successfully
RFSwitch#
NOTE: The console (by default), does not display a user entered
keyword for an old password and new password.
Leaving the old password and new password fields empty displays the
following error message:
Error: Invalid password length. It should be between 8 -
32characters.

Motorola RFS Series Specifications

General

Brand	Motorola
Model	RFS Series
Category	Switch
Language	English