Motorola RFS Series

Extended ACL Instance
15-15
15.1.6 mark
 Extended ACL Config Commands
Specifies packets to mark
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
mark [8021p|dscp|tos]
mark [8021p <vlan-priority-value>|dscp
<dscp-codepoint-value>|tos <tos-value>] [icmp|ip|tcp|udp]
mark [8021p <vlan-priority-value>|dscp <dscp-codepoint-
value>|tos <tos-value>] icmp [<source-ip/mask>|any|host
<ip>] [<dest-ip/mask>|any|host <ip>] {<ICMP-type> {<ICMP-
code>}} {log} {rule-precedence <1-5000>]}
mark [8021p <vlan-priority-value>|dscp <dscp-codepoint-
value>|tos <tos-value>] ip [<source-ip/mask>|any|host <ip>]
[<dest-ip/mask>|any|host <ip>] {log} {rule-precedence <1-
5000>}
mark [8021p <vlan-priority-value>|dscp <dscp-codepoint-
value>|tos <tos-value>] [tcp|udp] [<source-ip/mask>|any|host
<ip>] {eq <source-port>|range <starting-source-port>
<ending-source-port>} [<dest-ip/mask|any|host <ip>] {eq
<source-port>} {range <starting-source-port> <ending-source-
port>} {log} {rule-precedence <1-5000>}
Parameters
8021p <vlan-priority-
value>
Sets the 802.1p VLAN user priority value to <vlan-priority-
value> (0-7).
dscp <dscp-
codepoint-value>
Sets the Differentiated Services Code Point code-point value
to <dscp-codepoint-value> (0-63)