Crypto-group Instance
The (config-crypto-group) instance configures the default group properties of the
ISAKMP client.
To navigate to this instance, use the command:
RFSwitch(config)#crypto isakmp client configuration group
default
RFSwitch(config-crypto-group)#
7.1 Crypto Group Config Commands
Table 7.1 summarizes the switch config-crypto-group commands
Table 7.1 Crypto Group Command Summary
Command Description Ref.
clrscr Clears the display screen page 7-3
dns Defines a primary and secondary Domain Name Server
(DNS)
page 7-4
end Ends the current mode and moves to the EXEC mode page 7-5
exit Ends the current mode and moves to the previous mode page 7-6
help Displays the interactive help system page 7-7
service Invokes service commands to troubleshoot or debug the
(config-crypto-isakmp) instance configuration
page 7-8
To Next Page
Loading...
Need help?
General
