Motorola RFS Series

Common Commands
2-97
2.1.39 traffic-shape
 Common to all modes
Displays traffic shaping parameters
Supported in the following platforms:
• RFS7000
Syntax
show traffic-shape [config|priority-map|statistics]
Parameters
Example
RFSwitch(config)#show traffic-shape priority-map
802.1p | Shaping priority
0 | 2
1 | 0
2 | 1
3 | 3
4 | 4
5 | 5
6 | 6
7 | 7
RFSwitch(config)#
SWITCH NOTE: This command is not supported in:
• RFS6000
[config|
priority-map|
statistics]
• config class – Displays traffic shaping configuration
• statistics class – Displays traffic shaping statistics
• class <1-4> – Displays traffic shaping class number
• priority-map – Displays .1p to transmit priority map