Extended MAC ACL Instance
17-23
17.2 Configuring MAC Extended ACL
MAC Extended ACLs contain rules based on the following parameters:
• Source MAC address
• Destination MAC address
• Ethertype– accepts well known types like IP, ARP, VLAN or an integer value between
1-65535.
•VLAN-ID
• VLAN 802.1p user priority
Source and Destination MAC address are mandatory parameters.
Execute the following commands to configure a MAC extended ACL with different rule
parameters on the switch:
RFSwitch(config)#mac access-list extended macextacl
RFSwitch(config-ext-macl)#permit 00:a0:f8:00:00:00
ff:ff:ff:00:00:00 any rule-precedence 10
RFSwitch(config-ext-macl)#deny any any type arp rule-
precedence 20
RFSwitch(config-ext-macl)#deny any any vlan 23 rule-
precedence 30
To Next Page
Loading...
