Motorola RF Switch CLI Reference Guide
20-26
20.1.10 ap-standby-attempts-threshold
Wireless Configuration Commands
Sets the number of attempts after which the standby switch starts adopting APs.
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
ap-standb
y-attemp
ts-thresho
ld <attempts>
Parameters
Example
RFSwitch(config-wireless)#ap-standby-attempts-threshold 100
RFSwitch(config-wireless)#
<attempts>
Sets the number of attempts to <attempts> in the range
5–200.
To Next Page
Loading...
