Motorola RFS Series

Wireless Instance
20-29
20.1.13 auto-select-channels
 Wireless Configuration Commands
Specifies a list of channels that will be used when automatic channel scan (ACS) and
dynamic frequency selection (DFS)
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
auto-select-channels [11a|11bg] [<channel-list>|
add <channel-list>|remove <channel-list>]
Parameters
Example
RFSwitch(config-wireless)#auto-select-channels 11a 1,3,5
RFSwitch(config-wireless)#
[11a|11bg]
[<channel-list>|
add <channel-list>|
remove <channel-list>]
A comma separated list of 802.11a or 802.11bg channels
• <channel-list> – a list of comma separated channels
• add <channel-list> – adds <channel-list> channels to
existing list
• remove <channel-list>– remove <channel-list> channels
from existing list