Motorola RF Switch CLI Reference Guide
19-40
19.1.16 server

Radius Configuration Commands
Configures server certificate parameters used by a RADIUS server
The server certificate is a part of a trustpoint created using crypto on page 5-22.
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
server trust-point <trust-point name>
Parameters
Usage Guidelines
Create a trustpoint using (crypto-pki-trustpoint). The server certificate must be
created under the trustpoint using crypto-pki commands. Refer to crypto on page 5-22 for
more information.
Example
RFSwitch(config-radsrv)#server trust-point TestTP
RFSwitch(config-radsrv)#
server trust-point
<trust-point name>
Configures server certificate parameters
• trust-point <trust-point name> – Sets the trustpoint
configuration
• <trust-point name> – Existing trustpoint name