Motorola RF Switch CLI Reference Guide
20-56
20.1.31 manual-wlan-mapping
Wireless Configuration Commands
Manually maps WLANs configured on a radio
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
manual-wlan-mapping enable
Parameters
Usage Guidelines
Use the {no} manual-wlan-mapping enable command to disable manual mapping
of WLANs configured on a radio.
Example
RFSwitch(config-wireless)#manual-wlan-mapping enable
RFSwitch(config-wireless)#
enable Enables support for manual WLAN mapping.
To Next Page
Loading...
