Motorola RF Switch CLI Reference Guide
17-20
17.1.10 show
MAC Extended ACL Config Commands
Displays current system information running on the switch
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
show <paramater>
Parameters
Usage Guidelines
The show access-list command displays the access lists configured for the switch.
Provide the access list name or number to view specific ACL details
Example
RFSwitch(config-ext-macl)#show ?
access-list Internet Protocol (IP)
aclstats Show ACL Statistics information
alarm-log Display all alarms currently in the
system
autoinstall autoinstall configuration
SWITCH NOTE: The following commands display only for
RFS6000 and RFS4000:
• power
The following commands display only for RFS7000 and RFS4000:
• port-channel
• static-channel-group
? Displays all the parameters for which information can be
viewed using the show command
To Next Page
Loading...
