Motorola RF Switch CLI Reference Guide
25-6
Example
RFSwitch(config-wireless-smart-rf)#exit
RFSwitch(config-wireless)#
25.1.6 extensive-scan
Smart RF Instance
Enters the extensive scan mode
The device needs calibration at every
tx-power level.
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
extensive-scan enable
Parameters
Example
RFSwitch(config-wireless-smart-rf)#extensive-scan enable
RFSwitch(config-wireless-smart-rf)#
25.1.7 help
Smart RF Instance
Displays the system’s interactive help in HTML format
Supported in the following platforms:
• RFS7000
• RFS6000
extensive enable Enables the extensive scan mode.The radio scans each
channel at all power levels unlike the normal scan mode
where it scans each channel @ 20dBm (highest power).
To Next Page
Loading...
