Motorola RF Switch CLI Reference Guide
6-8
6.1.6 group
Crypto ISAKMP Config Commands
Specifies the Diffie-Hellman group (1 or 2) used by the IKE policy to generate keys (which
is then used to create an IPSec SA)
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
group [1|2|5]
Parameters
Usage Guidelines
The local IKE policy and the peer IKE policy must have matching group settings in order for
negotiation to be successful.
Example
RFSwitch(config-crypto-isakmp)#group 5
RFSwitch(config-crypto-isakmp)#
1 Diffie-Hellman group 1
2 Diffie-Hellman group 2
5 Diffie-Hellman group 5
To Next Page
Loading...
