Motorola RFS Series

Motorola RF Switch CLI Reference Guide
20-120
20.1.50 wlan
 Wireless Configuration Commands
Configures Wireless LAN related commands
NOTE: Manual mapping of wlan will be erased when the actual wlan is disabled and enabled
immediately.
Syntax
wlan [<1-256>|<wlan-list>] [80211-extensions|802.11w-mfp|
aap-ipfilter-rules|aap-proxy-radius|accounting|acl|add-
vlan|answer-bcast-ess|
authentication-type|client-bridge-backhaul|
deny-static-mu|description|dot11i|enable|encryption-
type|hold-time|hotspot|hs-failover|
inactivity-timeout|independent|ip|kdc|mobility|
max-flows-per-mu|
mu-mu-disallow|nac-mode|nac-server|nas-id|nas-port-id|
qos|radius|secure-beacon|set-vlan-user-limit|
smart-scan-channels|ssid|storm-control|syslog|url-
log|vlan|wep128|wep64]
wlan <1-256> [answer-bcast-ess|enable|independent|
mu-mu-disallow
wlan <1-256> 80211-extensions move-command enable
wlan <1-256> 802.11w-mfp optional required sa-query
wlan <1-256> aap-proxy-radius enable realm <realm name>
strip
wlan <1-256> accounting [none|radius|ssyslog]
wlan <1-256> acl exceed-rate mu-denied-traffic <0-10000000>
disassociate
wlan <1-256> add-vlan [<1-4094>|<vlan-list>]
{limit <0-4096>}
wlan <1-256> authentication-type [eap|hotspot|kerberos|
mac-auth|none]
wlan <1-256> aap-ipfilter-rules [in|out]
{<1-20>|AAP_IPF_RULE}
wlan <1-256> client-bridge-backhaul enable
wlan <1-256> description <description>
wlan <1-256> dot11i [handshake|key|key-rotation|
key-rotation-interval|opp-pmk-caching|phrase|pmk-caching|
preauthentication|second-key|tkip-cntrmeas-hold-time|
wpa2-tkip]