Motorola RF Switch CLI Reference Guide
2-38
2.1.6 show
Common Commands
Displays the settings for the specified system component. There are a number of ways to
invoke the show command:
• When invoked without any arguments, it displays information about the current
context. If the current context contains instances, the show command (usually)
displays a list of these instances.
• When invoked with the display_parameter, it displays information about that
component.
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
show <parameter>
Parameters
Display
Parameters Description Mode Example
autoinstall Displays the autoinstall
configuration
Common page 2-43
banner Displays the message of the day
login banner
Common page 2-44
commands Displays command lists Common page 2-45
crypto Displays current encryption details Common page 2-46
environment Displays environmental information Common page 2-50
history Displays the session command
history
Common page 2-50
interfaces Displays the current interface status
and configuration
Common page 2-51
To Next Page
Loading...
