Motorola RFS Series User Manual

DHCP Server Instance
Use the (config-dhcp) instance to configure the DHCP server address pool associated
with the switch.
To move to this instance, use the command.
RFSwitch(config)#ip dhcp pool <pool-name>
RFSwitch(config-dhcp)#
Also refer to Chapter 12, Interface Instance, Section 12.1.8 ip for other DHCP related
configurations.
18.1 DHCP Config Commands
Table 18.1 summarizes config-dhcp commands:
Table 18.1 DHCP Server Command Summary
Command Description Ref.
address Defines the DHCP server include range page 18-4
bootfile Assigns a boot file name. The bootfile name can
contain letters, numbers, dots and hyphens.
Consecutive dots and hyphens are not permitted
page 18-5
class Associates a class with a pool and moves to the
DHCP pool class configuration mode
page 18-6
client-identifier Uses an ASCII string as a client identifier page 18-9

Motorola RFS Series Specifications

General

Brand	Motorola
Model	RFS Series
Category	Switch
Language	English