Crypto-isakmp Instance
The (config-crypto-isakmp) instance is used to configure ISAKMP policies.
To enter this instance, use this command:
RFSwitch(config)#crypto isakmp policy <1-10000>
RFSwitch(config-crypto-isakmp)#
6.1 Crypto ISAKMP Config Commands
Table 6.1 summarizes crypto-isakmp commands
Table 6.1 Crypto ISAKMP Command Summary
Command Description Ref.
authentication Sets the authentication scheme page 6-3
clrscr Clears the display screen page 6-4
encryption Sets the encryption algorithm page 6-5
end Ends the current mode and moves to the EXEC mode page 6-6
exit Ends the current mode and moves to the previous mode page 6-7
group Sets the Diffie-Hellman group page 6-8
hash Sets the hash algorithm page 6-9
help Provides a description of the interactive help system page 6-10
To Next Page
Loading...
