Motorola RFS Series

Motorola RF Switch CLI Reference Guide
20-54
20.1.30 mac-auth-local
 Wireless Configuration Commands
Configures the local MAC authentication list
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
mac-auth-local <1-1000> [allow|deny|rate-limit]
mac-auth-local <1-1000> [allow|deny] <starting-MAC>
<ending-MAC> [<list>|not-mapped] {<radio-desc>|
zone [<1-48>|default|unknown]}
mac-auth-local <1-1000> rate-limit
[wired-to-wireless|wireless-to-wired] <100-1000000>
Parameters
<1-1000> Sets the mac-auth-local entry index to a value between 1
and 1000.
allow Allows mobile units that match this rule to associate.
deny Denies association to mobile units that match this rule.
rate-limit Sets the rate limit value for this ACL entry.
<starting-MAC> Starting MAC address in AA-BB-CC-DD-EE-FF or
AA:BB:CC:DD:EE:FF format.
<ending-MAC> Ending MAC address in AA-BB-CC-DD-EE-FF or
AA:BB:CC:DD:EE:FF format.
<list> Configures the local MAC authentication list.Sets the list
(1,3,7) or range (3-7) of WLAN indices.
not-mapped An unmapped row in the ACL.