Motorola RF Switch CLI Reference Guide
20-46
20.1.23 dot11-shared-key-auth
Wireless Configuration Commands
Enables support for 802.11 shared key authentication
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
dot11-shared-key-auth enable
Parameters
Usage Guidelines
Use the {no} dot11-shared-key-auth enable command to disable support for
802.11 shared key authentication.
Example
RFSwitch(config-wireless)#dot11-shared-key-auth enable
RFSwitch(config-wireless)#
NOTE: Shared key authentication has known weaknesses that can
compromise your WEP key. It should only be configured to
accommodate wireless stations unable to carry out Open-System
authentication.
enable Enables support for shared key authentication
To Next Page
Loading...
