Motorola RFS Series

Privileged Exec Commands
4-9
4.1.5 clear
 Priv Exec Command
Resets the current context
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
clear [aclstats|alarm-log|arp-cache|counters|crypto|
dosstats|ip|logging|mac-address-table|mobility|
spanning-tree]
clear [aclstats|arp-cache|dosstats|logging]
clear alarm-log [<1-65535>|acknowledge|all|new]
clear counters [all|bridge|firewall|igmp-snooping|interface|
router|thread]
clear counters interface [<interface>|all|ge <1-8>|me1|sa
<1-4>|up1|vlan <1-4094>]
NOTE: In RFS4000,
clear counters interface [<interface>|all|ge <1-5>|me1|
sa <1-6>|up1|vlan <1-4094>|wwan]
clear crypto [ike|ipsec] sa {<IP>}
clear ip [dhcp|pmtu-discovery-blackhole-cache]
clear ip dhcp binding [*|<IP>|all]
clear ip pmtu-discovery-blackhole-cache
clear mac-address-table [dynamic|multicast|static]
[address <address>|bridge <1-32>|interface <interface>|
vlan <vlan>]
clear mobility [event-log|mobile-unit|peer-statistics]
clear mobility event-log [mobile-unit|peer]
clear mobility mobile-unit [<MAC>|all|foreign-database|
home-database]
clear mobility peer-statistics {<peer-IP>}