Motorola RF Switch CLI Reference Guide
5-18
5.1.6 bridge
Global Configuration Commands
Configures bridge specific commands
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
{no} bridge [<bridgegroup>|multiple-spanning-tree]
bridge <bridegegroup> [address|ageing-time]
bridge <bridegegroup> address <MAC> [discard|forward]
[<interface>|ge <1-8>|me1|sa <1-4>|up1|vlan <1-4094>]
bridge <bridegegroup> ageing-time [0|<10-1000000>]
bridge multiple-spanning-tree enable
SWITCH NOTE: The interfaces mentioned below are
supported in the following platforms:
• ge <index> – RFS7000 and RFS4000 supports 4 GEs, RFS6000 supports
8 GEs
• sa <1-4> – Supported on RFS7000, and sa <1-6> on RFS4000
• me1 – Only supported on RFS7000 and RFS6000
• up1 – Only supported on RFS6000 and RFS4000
To Next Page
Loading...
