Motorola RF Switch CLI Reference Guide
21-12
Syntax
rfid
Parameters
None
Example
RFSwitch(config-rtls)#rfid
RFSwitch(config-rtls-rfid)#
21.1.12 service

RTLS Config Commands
Invokes service commands to troubleshoot or debug (config-rtls) instance
configurations
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
service [filter|inventory|show]
service filter <1-100> [action|length|mask|
memory-bank|name|offset]
service filter <1-100> action [allow|deny]
service filter <1-100> length <1-128>
service filter <1-100> mask <mask-name>
service filter <1-100> memory bank [epc|tid|uid]
service filter <1-100> name <name>
service filter <1-100> offset <0-32>
NOTE: rfid command instantiates (config-rtls-rfid) sub-
instance. For more details see RFID Instance on page 23-1.
The prompt changes from
RFSwitch(config-rtls)# to
RFSwitch(config-rtls-rfid)