Motorola RFS Series User Manual

RTLS Instance
21-13
service inventory [<1-100>|default]
service inventory <1-100> [duration <0-100000>|
filter{<1-100>|<name>}|report {current|differential}|
round <0-10>|start|start-trigger|stop-trigger|zone]
service inventory <1-100> start-trigger [gpi port <1-65535>
event <0-1> timeout <0-65535> |immediate|periodic
offset <0-65535> period <0-65535> ]
service inventory <1-100> stop-trigger [duration
<0-65535>|gpi port <1-65535> event <0-1> timeout <0-65535>
|immediate]
service inventory <1-100> zone <1-48>
service show cli
Parameters
service filter
<1-100>
[action|length
<1-128>|mask|
memory-
bank|name|off
set<0-32>]
Configures RFID tag filter
• action [allow|deny] – Configures action for tag filter. By
default its configured to allow
• length <1-128> – Configures number of bits to compare
against tag mask
• mask <name> – Configures tag mask for filter
• memory-bank [epc|tid|uid] – Configures tag memory
bank for the filter
• epc – EPC memory bank
• tid – TID memory bank
• uid – UID memory bank
• name <name> – Configures tag filter name
• offset <0-32> – Configures first location of memory bank
against which the tag mask is compared

Motorola RFS Series Specifications

General

Brand	Motorola
Model	RFS Series
Category	Switch
Language	English