Motorola RFS Series

Motorola RF Switch CLI Reference Guide
25-20
Parameters
Example
RFSwitch(config-wireless-smart-rf)#recover coverage-hole
enable
RFSwitch(config-wireless-smart-rf)#recover interference
enable
RFSwitch(config-wireless-smart-rf)#recover neighbor enable
RFSwitch(config-wireless-smart-rf)#
25.1.13 retry-threshold
 Smart RF Instance
Sets the threshold for the average number of retries performed before a radio re-runs a
channel scan
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
retry-threshold <0.0-15.0>
Parameters
recover [coverage-hole|
interference|neighbor]
enable
Enables individual self recovery features:
• coverage-hole enable – Enables recovery from
coverage-hole errors
• interference enable – Enables recovery from
interference errors
• neighbor enable – Enables recovery from errors due to
faulty neighbor radios
<0.0-15.0>
The value in decimal number. This is the average number of
retries a radio makes before it re-runs the channel scan.