Motorola RFS Series

Global Configuration Commands
5-41
5.1.12 ftp
 Global Configuration Commands
Configures the switch as an FTP server
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
ftp [enable|password|rootdir|username]
ftp password [0 <secret>|1 <secret>|<secret>]
ftp rootdir <DIR>
ftp username <LINE>
Parameters
enable Enables the FTP server
password [0 <secret>|
1 <secret>|<secret>]
Configures the FTP password. Set the password using one
of the following options:
• 0 <secret> — Password <secret> is specified
unencrypted
• 1 <secret> — Password <secret> is encrypted with
SHA1 algorithm
• <secret> — The password
rootdir <DIR> Configures the FTP root dir. Set the ROOT directory location
of the FTP server using:
• <DIR> — The root directory for the ftp server
username <LINE> Configures FTP username.
• <LINE> – The username for the ftp server