Privileged Exec Commands
4-49
4.1.33 upgrade
Priv Exec Command
Upgrades the software image
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
upgrade <URL> {background}
Parameters
Example
RFSwitch#upgrade tftp://157.235.208.105:/img
var2 is 10 percent full
/tmp is 2 percent full
Free Memory 161896 kB
FWU invoked via Linux shell
Running from partition /dev/hda5, partition to
update is /dev/hda6
Reading image file header
Removing other partition
Sep 08 15:57:18 2010: %KERN-6-INFO: EXT3 FS on
hda1, internal journal.
Making file system
Extracting files (this can take some time).Sep
...........................
Jan 08 15:58:17 2009: %DIAG-4-CPULOAD: One
minute average load limit exceeded,
value is 100.00% limit is 99.90% (top process
<URL> Location of the target firmware image used in upgrade
background Optional. Specifies that the upgrade should occur in the
background.
To Next Page
Loading...
