Motorola RFS Series

Crypto-isakmp Instance
6-13
6.1.11 service
 Crypto ISAKMP Config Commands
Invokes service commands to troubleshoot or debug the (config-crypto-isakmp)
instance configurations.
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
service show cli
Parameters
Example
RFSwitch(config-crypto-isakmp)#service show cli
Crypto Isakmp Config mode:
+-authentication
+-pre-share [authentication ( rsa-sig | pre-share )]
+-rsa-sig [authentication ( rsa-sig | pre-share )]
+-clrscr [clrscr]
+-do
+-LINE [do LINE]
+-encryption
+-3des [encryption ( des | 3des | aes | aes-192 | aes-256
)]
+-aes [encryption ( des | 3des | aes | aes-192 | aes-256
)]
+-aes-192 [encryption ( des | 3des | aes | aes-192 | aes-
256 )]
+-aes-256 [encryption ( des | 3des | aes | aes-192 | aes-
256 )]
+-des [encryption ( des | 3des | aes | aes-192 | aes-256
)]
+-end [end]
+-exit [exit]
+-group
cli Displays the CLI tree of current mode