Motorola RF Switch CLI Reference Guide
20-156
20.1.55 test
Wireless Configuration Commands
Testing neighbour report on air
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
RFS7000(config-wireless)test dot11k [make-bcn-rep|
send-beacon-req|send-nbr-rep]
RFS7000(config-wireless) test dot11k make-bcn-rep mu <MAC>
neighbor <MAC>
RFS7000(config-wireless) test dot11k send-beacon-req
<1-8192> measurement-duration <100-10000>
RFS7000(config-wireless) test dot11k send-beacon-req
[mu|MU] <MAC> measurement-duration <100-10000>
RFS7000(config-wireless) test dot11k send-nbr-rep mu <MAC>
neighbor
Parameters
make-bcn-rep mu
<MAC> neighbour
<MAC>
Making the beacon report
• mu – Displays mobile-units mac address
• neighbour – Displays neighbor radio's BSS ID
• MAC – Displays mac address in AA-BB-CC-DD-EE-FF
format
To Next Page
Loading...
