Motorola RFS Series

Motorola RF Switch CLI Reference Guide
20-106
20.1.47 show
 Wireless Configuration Commands
Displays current system information running on the switch
For other show commands, see Chapter 2, Section 2.1.6 show on page 2-38.
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
show <paramater>
Parameters
Example
RFSwitch(config-wireless)#show ?
aap-wlan-acl wlan based acl
aap-wlan-acl-stats IP filtering wlan based
statistics
‘ access-list Internet Protocol (IP)
aclstats Show ACL Statistics
information
alarm-log Display all alarms
currently in the system
autoinstall autoinstall configuration
banner Display Message of the Day
Login banner
SWITCH NOTE: The following commands display only for
RFS6000 and RFS4000:
• power
The following commands display only for RFS7000 and RFS4000:
• port-channel
• static-channel-group
? Displays all the parameters for which information can be
viewed using the show command