Motorola RFS Series

Wireless Instance
20-57
20.1.32 mobile-unit
 Wireless Configuration Commands
Configures mobile unit related parameters
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
mobile-unit [association-history|probe-history]
mobile-unit association-history [enable|clear]
mobile-unit probe-history [enable|add <1-200> <MAC>]
Parameters
Example
RFSwitch(config-wireless)#mobile-unit probe-history enable
RFSwitch(config-wireless)#mobile-unit association-history
enable
RFSwitch(config-wireless)#mobile-unit probe-history add 20
AA-BB-CC-DD-EE-FF
RFSwitch(config-wireless)#
association-history
[enable|clear]
Enables a mobile unit’s association history.
• enable – Enables a mobile unit’s association history
• clear – Clears the association history for all mobile units
probe-history
[enable|add <1-200>
<MAC>
Mobile unit probe logging configuration commands.
• enable – Enables a mobile unit’s probe logging feature
• add <1-200> <MAC>– Adds a mobile unit to probe
history logging
• <1-200> – Select an index value between 1 and 200 to
add probe logging MAC.
• <MAC> – Sets the MAC address of the mobile used
for probe history logging