Motorola RFS Series

Motorola RF Switch CLI Reference Guide
5-40
5.1.11 errdisable
 Global Configuration Commands
Enables the timeout mechanism for the port to be enabled back after an error
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
errdisable recovery [cause bpduguard|interval <10-1000000>]
Parameters
Usage Guidelines
Use no command with errdisable parameter to the disable bridge timeout mechanism
for the port
Example
RFSwitch(config)#errdisable recovery interval 100
RFSwitch(config)#
RFSwitch(config)#errdisable recovery cause bpduguard
RFSwitch(config)#
RFSwitch(config)#no errdisable recovery cause bpduguard
RFSwitch(config)#
recovery
[cause bpduguard|
interval <10-1000000>]
Enables the timeout mechanism for the port to recover after
an error.
• cause bpduguard – Recover from an error condition
caused due to bpduguard
• interval <10-1000000> – The time interval after which a
port is recovered or enabled after an error condition