Motorola RFS Series

Smart RF Instance
25-23
Example
RFSwitch(config-wireless-smart-rf)#schedule-calibrate enable
RFSwitch(config-wireless-smart-rf)#schedule-calibrate
interval 2
RFSwitch(config-wireless-smart-rf)#schedule-calibrate
start-time 10:30 1 1
RFSwitch(config-wireless-smart-rf)#
25.1.17 select-channels
 Smart RF Instance
Selects a list of channels for Automatic Channel Scan and Smart RF
Use this command to add channels or remove them from the channel list.
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
select-channel [<WORD>|add<WORD>|remove <WORD>]
Parameters
interval <1-
366>
Sets the interval in days between each auto calibration
start-time
<HH:MM>
<1-31> <1-12>
<2008-2035>
Sets the time and day to start the first auto-calibration.
<HH:MM> is in 24 hours format.
<WORD>
A comma separated list of channel numbers
add <WORD>)
Add a channel or a list of channels to the channel list
remove
<WORD>
Remove a channel or a list of channels from the channel list