Motorola RFS Series

Motorola RF Switch CLI Reference Guide
21-2
21.1.1 aeroscout
 RTLS Config Commands
Configure support for Aeroscout RTLS engine.
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
aeroscout [enable|multicast-listen-addr<MAC-Address>]
Parameters
no Negates a command or sets its defaults page 21-8
reference-tag Configures reference tags page 21-10
rfid Configures RFID readers page 21-11
service Invokes service commands to troubleshoot or debug
(config-rtls) instance configurations
page 21-12
show Displays the running system information page 21-16
site Configures site parameters page 21-19
sole Configures Smart Opportunistic Location Engine (SOLE)
parameters
page 21-20
switch Configures switch parameters page 21-21
zone Configures zone page 21-22
ap Configures AP specific RTLS parameters page 21-23
enable
Enables and configures external Aeroscout RTLS engine
Command Description Ref.