Standard ACL Instance
The Standard ACL instance (config-std-acl) is used to manage the standard Access
Control List entries associated with the switch.
To navigate to this instance, use the command:
RFSwitch(config)#ip access-list standard [<ACL-name>|
<1-99>|<1300-1999>]
RFSwitch(config-std-acl)#
16.1 Standard ACL Config Commands
Table 16.1 summarizes the config-std-nacl commands:
Table 16.1 Standard ACL Config Command Summary
Command Description Ref.
clrscr Clears the display screen page 16-3
deny Specifies packets to reject page 16-4
end Ends the current mode and moves to the EXEC mode page 16-6
exit Ends the current mode and moves to the previous mode page 16-7
help Displays the interactive help system page 16-8
mark Specifies packets to mark page 16-9
no Negates a command or sets its defaults page 16-11
To Next Page
Loading...
Need help?
General
