Motorola RFS Series

Global Configuration Commands
5-79
5.1.26 ntp
 Global Configuration Commands
Configure Network Time Protocol (NTP) values
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
ntp [access-group|authenticate|authentication-key|autokey|
broadcast|broadcastdelay|master|peer|server|trusted-key]
ntp access-group [peer|query-only|serve|serve-only]
[<1-99>|<100-199>|<1300-1999>|<2000-2699>]
ntp authenticate
ntp authentication-key <key> md5 [0 <secret>|2
<secret>|<secret>]
ntp autokey [client-only|host]
ntp broadcast [client|destination]
ntp broadcast destination <IP> {[key <1-65534>|version
<1-4>]}
ntp broadcastdelay <1-999999>
ntp master {<1-15>}
ntp [server|peer] <peer-name-or-IP>
ntp [server|peer] <peer-name-or-IP>
[autokey|key|prefer|version]
ntp [server|peer] <peer-name-or-IP> autokey
{[prefer {verson <1-4>}|version <1-4> {prefer}]}
ntp [server|peer] <peer-name-or-IP> key <1-65534> [prefer
{verson <1-4>}|version <1-4> {prefer}]
ntp [server|peer] <peer-name-or-IP> prefer {version <1-4>}
ntp [server|peer] <peer-name-or-IP> version <1-4> {prefer}
ntp trusted-key <1-65534>