Motorola RFS Series User Manual

Crypto-ipsec Instance
Use the (config-crypto-ipsec) instance to define the transform configuration for
securing data (esp-3des, esp-sha-hmac etc.).
To navigate to this instance, use the command
RFSwitch(config)#crypto ipsec transform-set
<transform-set-name> <encryption-type> <auth-type>
RFSwitch(config-crypto-ipsec)#
The transform set is assigned to a crypto map using the map’s transform-set command. For
more details, see crypto-map transform set on page 10-12.
9.1 Crypto IPSec Config Commands
The table below summarizes the config-crypto-ipsec commands:
Table 9.1 Crypto IPsec Command Summary
Command Description Ref.
show Displays running system information page 9-8
mode Configures the IP Sec transportation mode page 9-6
clrscr Clears the display screen page 2-2
end Ends the current mode and moves to the EXEC mode page 9-3
exit Ends the current mode and moves to the previous mode page 9-4
help Describes the interactive help system page 9-5

Motorola RFS Series Specifications

General

Brand	Motorola
Model	RFS Series
Category	Switch
Language	English