Motorola RFS Series

Motorola RF Switch CLI Reference Guide
5-32
Example
RFSwitch(config)#crypto pki ?
authenticate Authenticate and import CA Certificate
enroll Enroll
export Export
import Import
trustpoint Define a CA trustpoint
RFSwitch(config)#crypto pki trustpoint ?
WORD Trustpoint Name
RFSwitch(config)#crypto pki trustpoint Test
RFSwitch(config-trustpoint)#?
Trustpoint Config commands:
clrscr Clears the display screen
company-name Company Name(Applicable only for request)
email email
end End current mode and change to EXEC mode
exit End current mode and down to previous mode
fqdn Domain Name Configuration
help Description of the interactive help system
ip-address Internet Protocol (IP)
no Negate a command or set its defaults
password Challenge Password(Applicable only for
request)
rsakeypair Rsa Keypair to associate with the trustpoint
service Service Commands
show Show running system information
subject-name Subject Name is a collection of required
parameters to configure a trustpoint.
RFSwitch(config-trustpoint)#
5.1.8.1 Use Case 1: Configuring Remote VPN
Let us review an example of a mobile unit connected to the switch. Assume it wants
access to the corporate (trusted network) using IPSec VPN functionality.
A Motorola client is associated to a WLAN (say wlan1) attached to vlan2 on the switch.
vlan2 is on subnet 10.1.1.x and is running a DHCP server that assigns IP addresses for this
subnet. The corporate is on vlan3 of the switch, which has 192.168.0.x subnet.
The client being associated to wlan1 has an IP address of 10.1.1101x and wants to access
the 192.168.0.x network securely.