Motorola RFS Series

Wireless Instance
20-51
20.1.28 hotspot
 Wireless Configuration Commands
Configures the WLAN hotspot configuration
This overrides or adds to the existing hotspot configuration on the WLAN.
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
hotspot query <query-index> <WORD>
[ap-mac|mu-mac||ssid|mu-ip|switch-ip|switch-name||user-
string]
Parameters
Example
RFSwitch(config-wireless)# hotspot query 1 user-name user-
string
<query-index>
The index of this query in the query list. Can be in the range
of 1 and 10.
<WORD>
[
switch-ip||ssid
|mu-mac|mu-ip|
switch-name|
user-string]
The name of the field in the URL whose value is substitute
with the parameters
• ap-mac – AP MAC address of the MU.
• switch-ip – The controller’s router ip-address for the
external hotspot server
• mu-mac – MAC address of the MU.
• ssid – The WLAN’s SSID
• mu-ip – The MU’s IP address
• switch-name – The controller’s name on the network
• user-string – Specifies that the value of the query is a
user string.