Motorola RF Switch CLI Reference Guide
4-4
4.1.1 acknowledge

Priv Exec Command
Acknowledges alarms
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
acknowledge alarm-log [<1-65535>|all]
Parameters
Example
RFSwitch#acknowledge alarm-log all
No corresponding record found in the Alarm Log
RFSwitch#acknowledge alarm-log 200
No corresponding record found in the Alarm Log
RFSwitch#
alarm-log [<1-65535>|all] Acknowledges alarms
• <1-65535> – Acknowledges the specific alarm ID
•all – Acknowledges all alarms