Motorola RFS Series

Motorola RF Switch CLI Reference Guide
20-58
20.1.33 mobility
 Wireless Configuration Commands
Sets mobility parameters
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
mobility [enable|local-address|max-roam-period|peer]
mobility enable
mobility local-address <IP>
mobility max-roam-period <1-300>
mobililty peer <IP>
Parameters
Example
RFSwitch(config-wireless)#mobility enable
RFSwitch(config-wireless)#mobility local-address 12.12.12.1
RFSwitch(config-wireless)#mobility max-roam-period 10
RFSwitch(config-wireless)#mobility peer 157.208.235.108
RFSwitch(config-wireless)#
enable Enables mobility globally
local-address <ip> Sets the local address for mobility
• <IP> – IP address in A.B.C.D format
max-roam-period
<1-300>
Sets the Max Roam Period for a mobile unit (in seconds) to
a value in the range of 1 and 300.
peer <ip> Adds a peer to this mobility region
• <IP> – IP address of the Peer in A.B.C.D format