Motorola RF Switch CLI Reference Guide
2-82
2.1.30 redundancy members
Common to all modes
Displays the member switches in the cluster. The user can provide the IP address of the
switch in cluster whose information alone is needed.
Syntax
show redundancy members [<IP>|brief]
Parameters
Example
RFSwitch(config)#show redundancy members brief
Member ID (Self) : 10.10.10.10
Member State : Not Applicable
Member ID : 10.10.10.1
Member State : Peer Configured
redundancymembers
[<IP>|brief]
Displays member switches in the cluster
• <IP>– Displays the IP addresses of member switches
• brief – Displays members in brief
To Next Page
Loading...
