Motorola RFS Series

Motorola RF Switch CLI Reference Guide
20-118
20.1.48 smart-rf
 Wireless Configuration Commands
Configures Smart-RF Management parameters and moves to the
(config-wireless-smart-rf) instance
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
smart-rf
Parameters
None
Example
RFS7000(config-wireless)#smart-rf
RFS7000(config-wireless-smart-rf)#
NOTE: smart-rf initiates the(config-wireless-smart-rf)
instance. For more details see Chapter , Smart RF Instance. The prompt
changes from RFSwitch (config-wireless)# to RFSwitch (config-
wireless-smart-rf)