Motorola RFS Series

ESPI Instance
22-9
22.1.7 service
 ESPI Config Commands
Invokes service commands to troubleshoot or debug (config-if) instance configurations
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
service show cli
Parameters
None
Example
RFSwitch(config-rtls-espi)#service show cli
ESPI Config mode:
+-adapter
+-ADAPTER
+-activate [adapter ADAPTER activate]
+-port
+-<3000-3100> [adapter ADAPTER port <3000-3100>]
+-clrscr [clrscr]
+-do
+-LINE [do LINE]
+-end [end]
+-exit [exit]
+-help [help]
+-no
+-adapter
+-ADAPTER
+-activate [no adapter ADAPTER activate]
+-quit [quit]
............................................................
............................................................
............................................................
............................................................
............................................................
............................................................
..........................................
RFSwitch(config-rtls-espi)#