Motorola RF Switch CLI Reference Guide
22-8
22.1.6 no
ESPI Config Commands
Defines the name of the adapter or disables the adapter(s)
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
no adapter ale-tcp [enable|port <3000-3100>]
Parameters
Example
RFSwitch(config-rtls-espi)#no adapter ale-tcp enable
RFSwitch(config-rtls-espi)#
adapter ale-tcp
[enable|port <3000-
3100>]
Negates ESPI adapter configurations
• adapter – Application side Protocol implemented by
adapter
• ale-tcp – ALE over TCP Adapter
• enable – Deactivates/disables ESPI adapter
• port <3000-3100>– Configure ESPI adapter
listening port
To Next Page
Loading...
