Crypto-map Instance
The (config-crypto-map) commands define a Certificate Authority (CA) trustpoint.
This is a separate instance, but belongs to the
crypto pki trustpoint mode under the
config instance.
To navigate to this instance, use the command:
RFSwitch(config)#crypto map <map-name> <sequence>
[ipsec-isakmp|ipsec-manual] {dynamic}
RFSwitch(config-crypto-map)#
10.1 Crypto Map Config Commands
Table 10.1 summarizes config-crypto-map commands:
Table 10.1 Crypto Map Command Summary
Command Description Ref.
clrscr Clears the display screen page 10-3
end Ends the current mode and moves to the EXEC mode page 10-4
exit Ends the current mode and moves to the previous mode page 10-5
help Describes the interactive help system page 10-6
match Assigns an IP access-list to a crypto map definition page 10-7
no Negates a command or set its defaults page 10-9
To Next Page
Loading...
Need help?
General
