AAP IP Filtering
The AAP IP Filter list mechanism (config-aap-ipfilter) creates filters based on the
request received from the switch. It then applies those filters to the specified WLAN/LAN.
To navigate to this instance, use the command
RFSwitch(config)#aap-ipfilter-list <filtername>
RFSwitch(config-aap-ipfilter)#
27.1 AAP IP Filter Config Commands
Table 27.1 summarizes config-aap-ipfilter commands:
Table 27.1 AAP IP FIlter Config Command Summary
Command Description Ref.
clear -all- rules Clears all the configured rules page 27-3
clrscr Clears the display screen page 27-4
deny Specifies packets to reject page 27-5
end Ends the current mode page 27-9
exit Ends the current mode and moves to the previous
mode
page 27-10
help Displays the interactive help system page 27-11
no Negates a command or sets its defaults page 27-12
To Next Page
Loading...
Need help?
General
