Motorola RFS Series

Global Configuration Commands
5-123
5.1.38 traffic-shape
 Global Configuration Commands
Optimizes network traffic
Supported in the following platforms:
• RFS7000
Syntax
traffic-shape [class|priority-map]
traffic-shape class <class-identifier> [max-buffers|
max-latency|rate]
traffic-shape class <class-identifier> max-buffers
<pri0-queue-length> <pri1-queue-length>
<pri2-queue-length> <pri3-queue-length>
<pri4-queue-length> <pri5-queue-length>
<pri6-queue-length> <pri7-queue-length> red-level
<pri0-queue-length-for-red> <pri1-queue-length-for-red>
<pri2-queue-length-for-red> <pri3-queue-length-for-red>
<pri4-queue-length-for-red> <pri5-queue-length-for-red>
<pri6-queue-length-for-red> <pri7-queue-length-for-red>
traffic-shape class <class-identifier> max-buffers
<pri0-queue-length> <pri1-queue-length>
<pri2-queue-length> <pri3-queue-length>
<pri4-queue-length> <pri5-queue-length>
<pri6-queue-length> <pri7-queue-length> red-percent
<pri0-queue-percent-for-red> <pri1-queue-percent-for-red>
<pri2-queue-percent-for-red> <pri3-queue-percent-for-red>
<pri4-queue-percent-for-red> <pri5-queue-percent-for-red>
<pri6-queue-percent-for-red> <pri7-queue-percent-for-red>
traffic-shape class <class-identifier> max-latency
<pri0-queue-latency> <pri1-queue-latency>
<pri2-queue-latency> <pri3-queue-latency>
<pri4-queue-latency> <pri5-queue-latency>
<pri6-queue-latency> <pri7-queue-latency> [msec|usec]
traffic-shape class <class-identifier> rate
{[Kbps|Mbps|bps]}
traffic-shape priority-map <0-7> <0-7> <0-7> <0-7> <0-7> <0-
7> <0-7> <0-7>
SWITCH NOTE: This command is not supported with:
• RFS6000
• RFS4000