Wireless Instance
20-49
20.1.26 fix-broadcast-dhcp-rsp
Wireless Configuration Commands
Converts broadcast DHCP server responses to unicast
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
fix-broadcast-dhcp-rsp enable
Parameters
Usage Guidelines
Use the {no} fix-broadcast-dhcp-rsp enable command to disable converting
broadcast DHCP server responses to unicast.
Example
RFSwitch(config-wireless)#fix-broadcast-dhcp-rsp enable
RFSwitch(config-wireless)#
enable Enables support for converting broadcast DHCP server
responses to unicast
To Next Page
Loading...
