Motorola RF Switch CLI Reference Guide
21-16
21.1.13 show
RTLS Config Commands
Displays current system information
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
show <parameters>
show rtls [aeroscout|espi|filter|ekahau|reference-tags|
rfid|site|sole|tags|zone]
Parameters
Usage Guidelines
Use ? at the end of each option until the final configuration is displayed.
Example
RFSwitch(config-rtls)#show ?
access-list Internet Protocol (IP)
aclstats Show ACL Statistics information
alarm-log Display all alarms currently in the
system
SWITCH NOTE: The following commands display only for
RFS6000 and RFS4000:
• power
The following commands display only for RFS7000 and RFS4000:
• port-channel
• static-channel-group
?
Suffix ? to the parameter to view its options and their
related configuration details.
To Next Page
Loading...
