Motorola RF Switch CLI Reference Guide
26-12
26.1.8 mu-mac
Role Config Commands
Configures the MU MAC addresses for role based firewall
Supported in the following platforms:
• RFS6000
• RFS7000
• RFS4000
Syntax
mu-mac [<MAC Address>|<MAC Address>/<Mask>|any]
Parameters
Example
RFSwitch(config-role)#mu-mac aa:bb:cc:dd:ee:ff
RFSwitch(config-role)#
<MAC Address> The address of the MU that is allowed. MAC address can
be in the format AA:BB:CC:DD:EE:FF or AA-BB-CC-DD-EE-FF
or AABB.CCDD.EEFF.
<MAC Address>/<Mask> The address and mask combination for the mu to be
allowed. <MAC Address> and <Mask> should be in the
format AA:BB:CC:DD:EE:FF or AA-BB-CC-DD-EE-FF or
AABB.CCDD.EEFF.
any Match with any MAC address
To Next Page
Loading...
